• Home
  • Vibromonitoring
  • MONITRAN
  • Eddy current probes

Proximity sensors

MTN EP080

The most common probe for high speed pumps with plain metal bearings able to measure small vibration levels and gaps up to 2mm. Probe Diameter 5mm.Body Length 37mm. Thread M8. Supplied with Eddy Current Probe Driver MTN/ECPD

Pump monitors
Turbines
DC gap machine tool
Gauges

  • Specification MTN EP080
      Option Value
      Power Supply -24 VDC @ 30 mA
      Sensitivity 8 mV/μm nominal
      Output Impedance <50 Ohms
      Linear Range 0 to 2mm
      Linearity 1% nominal
      Frequency Range DC to 10 kHz
      Operating Temperature Probe: -30 ºC to +180 ºC Driver: -20 ºC to +80 ºC
      Temperature Sensitivity Probe: less than 5% at 150 ºC Driver: less than 5% at 80 ºC
      Tip Material Peek
      Case Material Stainless steel
      Cable RG179 PTFE insulated Maximum Cable Length 9 metres
      Extension Cable MTN/EXTOECP (length to be specified)
      Calibration Material Steel grade AISI 4140
      Options 4-20 mA, other ranges, submersible, custom design, cable length.

MTN EP200

Used to measure coarser vibrations. Operating Gap 0 – 5mm. Probe Diameter 13mm.Body Length 62mm. Thread M16. Supplied with Eddy Current Probe Driver MTN/ECPD

Pump monitors
Turbines
Gauges

  • Specification MTN EP200
      Option Value
      Power Supply -24 VDC @ 30 mA
      Sensitivity 3,6 mV/μm nominal
      Output Impedance <50 Ohms
      Linear Range 0 to 5mm
      Linearity 1% nominal
      Frequency Range DC to 10 kHz
      Operating Temperature Probe: -30 ºC to +180 ºC Driver: -20 ºC to +80 ºC
      Temperature Sensitivity Probe: less than 5% at 150 ºC Driver: less than 5% at 80 ºC
      Tip Material Peek
      Case Material Stainless steel
      Cable RG179 PTFE insulated Maximum Cable Length 9 metres
      Extension Cable MTN/EXTOECP (length to be specified)
      Calibration Material Steel grade AISI 4140
      Options 4-20 mA, other ranges, submersible, custom design, cable length.

MTN EP340

Industrial eddy current probe. Generally used for precision gap measurements.

Pump monitors
Turbines
Gauges

  • Specification MTN EP340
      Option Value
      Power Supply -24 VDC @ 30 mA
      Sensitivity 2 mV/μm nominal
      Output Impedance <50 Ohms
      Linear Range 0 to 8,5 mm
      Linearity 1% nominal
      Frequency Range DC to 10 kHz
      Operating Temperature Probe: -30 ºC to +180 ºC Driver: -20 ºC to +80 ºC
      Temperature Sensitivity Probe: less than 5% at 150 ºC Driver: less than 5% at 80 ºC
      Tip Material Peek
      Case Material Stainless steel
      Cable RG179 PTFE insulated Maximum Cable Length 9 metres
      Extension Cable MTN/EXTOECP (length to be specified)
      Calibration Material Steel grade AISI 4140
      Options 4-20 mA, other ranges, submersible, custom design, cable length.

MTN EP480

Industrial eddy current probe. Used for widest gap measurements.

Plain metal bearing monitors
Turbines & pump monitors
Gauges

  • Specification MTN EP480
      Option Value
      Power Supply -24 VDC @ 30 mA
      Sensitivity 1,4 mV/μm nominal
      Output Impedance <50 Ohms
      Linear Range 0 to 12 mm
      Linearity 1% nominal
      Frequency Range DC to 10 kHz
      Operating Temperature Probe: -30 ºC to +180 ºC Driver: -20 ºC to +80 ºC
      Temperature Sensitivity Probe: less than 5% at 150 ºC Driver: less than 5% at 80 ºC
      Tip Material Peek
      Case Material Stainless steel
      Cable RG179 PTFE insulated Maximum Cable Length 9 metres
      Extension Cable MTN/EXTOECP (length to be specified)
      Calibration Material Steel grade AISI 4140
      Options 4-20 mA, other ranges, submersible, custom design, cable length.