• Home
  • Vibromonitoring
  • MONITRAN
  • Сontrol modules

Control modules

MTN 8006/8006G

The 8006 vibration module is designed to power and accept a signal from a constant-current accelerometer.

The signal can be integrated and converted to a 4-20mA current proportional to velocity (8006) or a standard acceleration (8006g) output.

The unit is housed in a DIN rail mounting box for easy installation into junction boxes etc.

  • Specification MTN 8006
      Parameter Value
      Power Input 24 Vdc at 40 mA
      Signal Input From 100 mV/g constant current accelerometer
      Outputs 4-20 mA proportional to acceleration or velocity
      Acceleration Range 0-50 g or as specified (Part no: MTN/8006g)
      Velocity Range 0-25 mm/s or as specified (Part no: MTN/8006)
      Temperature Range 0-85 °C
      Filter Low Pass –3 dB @ 1 kHz or as specified
      Options other filters available
      Construction Universal DIN Rail mounting enclosure
      Dimensions 62mm x 65mm x 11mm

MTN 8065

The 8065 vibration module is designed to power and accept an AC signal from a constant-current accelerometer.

. The module integrates this signal and provides a 0-10V output proportional to RMS velocity and enveloped g output plus a buffered, unfiltered (raw AC) output for connection to a data collector.

The module can operate with any 2-wire constant-current accelerometer i.e. 1100, 1120, 1130, 1830, 1135 etc. Envelope g values are considered by many to be a sensitive and convenient marker for bearing wear.

  • Specification MTN 8065
      Parameter Value
      Power Input +24 В, 15 мA
      Signal Input From 100 mV/g constant current accelerometer
      Output 1 0-10 VDC proportional to RMS velocity
      Range 0-20 mm/sec or as specified
      Output Offset 50 mV DC max. (0.125 mm/s)
      Frequency Range 10 Hz to 1 kHz (-3 db)
      Filters - two-pole Butterworth type 12 dB/octave
      Output 2 0-10 VDC proportional to Enveloped g
      Range 0-10 g or as specified
      Output Offset 50 mV DC max. (50 mg)
      Input Frequency Range 3 kHz – 6 kHz
      Enveloped Frequency range 10 Hz – 1 kHz
      Filters – two-pole Butterworth type 12 dB/octave
      Output 3 AC output – 100 mV/g or as specified
      Frequency Response 2 Hz – 10 kHz (-3 dB)
      Options Other envelope filter bands available upon request
      Construction Din rail mounting enclosure
      Dimensions 62mm x 65mm 22mm